Wireless Ethernet Bridge Vikosmo VK-100APg

BEST FTA RECEIVER

Canadian Shopper?

Customer Support

Home > Satellite Accessories >

Wireless Ethernet Bridge (Vikosmo VK-100APg Wireless Access Point)

Vikosmo VK-100APg

Wireless Ethernet Bridge

Our Price: US$59.99

Qty:

Description

The Vikosmo VK-100APg Wireless Access Point acts as a Wireless Ethernet Bridge (perfect for Nfusion Nova FTA receiver)

Setup Instructions

VK-100APg - ViKosmo Wireless 11b/g Access Point

There are 6 modes in VK-100APg :

AP mode :
Setting this mode in VK-100APg acts as a communication hub for users of a wireless device to connect to a wired LAN environment. VK-100APg is important for offering heightened wireless security and for extending the physical range of service a wireless user has access to.

Client mode :
Setting this mode in VK-100APg can communicate with each other by first going through an Access Point (AP), and requires access to the wired LAN in order to use services such as file servers or printers.

Bridge mode :
Setting this mode in VK-100APg can communicate directly with each other, without the use of an access point (AP). It is also referred to as peer-to-peer mode.

WDS Mode :
WDS is short for Wireless Distribution System. If your installations where one Access Point isn't enough to provide a good coverage, setting this mode in several VK-100APg (several Access Points) which extend your coverage to connect your network environment.

Universal Repeater Mode :
It is also a good way to extend your network coverage, and doesn't require the remote wireless devices have WDS function.

RADIUS Mode :
Specifies the RADIUS server information if you have an external RADIUS (Remote Authentication Dial-In User Service) server to authenticate a user.

Product Features:

Complies IEEE 802.11b/g standard, 10/100Mbps Ethernet Protocol.
Supports AP mode, Client mode, Bridge mode, WDS (Wireless Distributed System) mode, and Universal Repeater mode.
Supports Power Saving to allow a computer to stop transmitting through the wireless adapter during sleep mode.
Supports IAPP (Inter Access Point Protocol) to allow the wireless AP to communicate with neighboring access points for wireless roaming.
Provides the Turbo mode to enhance the wireless performance.
Wireless Security Options : WEP, WPA, WPA2 and WPA2 Mixed.
Supports IEEE 802.1x for user authentication.
Specifies the RADIUS server information if you have an external RADIUS (Remote Authentication Dial-In User Service) server to authenticate a user.
Provides Wireless Access Control Mode, and MAC Filter.
The DHCP Settings allows you to set the Dynamic Host Configuration Protocol (DHCP) server settings on the wireless AP.
Uses Event Log to view log records and manage log settings.
Upgrades firmware on the wireless AP through the web user interface.
Complies with CE, FCC, RoHS, and WEEE

Technical Specifications:

Standards : IEEE 802.11b/g, 10/100Mbps Ethernet Protocol
Bus Interface :
(1) 1 of 2dBi Detachable Antenna
(2) 1 of 10/100M Ethernet Ports (RJ-45)
Channels : Worldwide
Frequency Band : 2.4000 ~ 2.4835GHz
Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) BPSK, QPSK, CCK (11b)
Data Rate : 54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps auto fallback
Securities :
(1) 64/128-bit WEP Data Encryption, WPA, WPA2
(2) Built-in Firewall, MAC Filter
(3) Password protection for system management
(4) Event Log
Function :
(1) AP mode, Client mode, Bridge mode, WDS mode, and Universal Repeater mode
(2) Power Saving, IAPP, Turbo mode
(3) WEP, WPA, WPA2 and WPA2 Mixed
(4) IEEE 802.1x and RADIUS server information for user authentication
(5) Wireless Access Control Mode
(6) DHCP Server, Event Log
Antenna Type : External detachable dipole 2 dBi antenna (Connector : RP-SMA connector)
Transmit Power : 16dBm
Receive Sensitivity : -65dBm @ 54Mbps, -80dBm @ 11Mbps