Highlighted features of the FS1 First Strike Meter Satellite Finder:

First Strike Meters are made for the professional but are easy for the Novice to understand and use. No more searching through complicated menus to find the setting you need to change. All parameters show on one screen making it easy for the user to modify any setting. The FS1 quickly and easily finds even weak signals. Unlike the competitors meters, you can do a sweep of the dish to find the signal.

The First Strike meter Uses the same type display screen as cell phones so it can be read in direct sunlight. Display screen has a switchable back light so your meter can be used in low light conditions.

The FS1 meter has a Global Data Bank that holds all the satellites in a separate data bank. The meter also has a User Defined Data Bank that stores 100 satellites. The user can define new entries from the keypad. Re-calibration is never necessary due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.

The included rechargeable Li-on battery lasts approximately 3.5 hours on a full charge. If the battery runs low during use, you can loop the satellite receiver through the meter and power the meter from the satellite receiver power supply.

Features of the First Strike Satellite Meter:

• Preset Global Satellite Data Bank
• User Defined Satellite Data Bank
• Wide, Clear, Easy to Read LCD
• All Parameters show on one screen
• Easy to Learn, Easy Operation
• Keypad Editing
• Switchable Back Light
• Internal Power Supply
• Can be powered from the satellite receiver
• Universal Charger, 120vac 60Hz / 220vac 50 Hz
• 12vdc Car Charger
• True USB interface
• Replaceable "F-81" connectors
• Ruff Neck protective jacket

What's included in the box:

• AC adapter 1 pc
• Car charger 1 pc
• RF connector 2 pcs
• USB cable 1 pc
• User manual 1 pc
• Li-ion battery 1 pc

Technical Specifications:

• Input Frequency Range: 950~2150MHz
• Signal field intensity range: 30dBuV-105dBuV
• Measurement Unit: dBmV; dBµV; dBm
• Measurement Accuracy: ±1.5dB
• Input Resistance: 75 ohm
• Symbol Rate: 2Msps-45Msps
• Connector: F type
• Measurement type: signal strength; bit error rate; S/N
• QPSK switch: automatic identification
• 22K control: supported
• Audio-output: Speaker
• Display: Code segment wide-temperature LCD
• Memory content: 300 reserved locations for global satellite channels; 100 user-defined channels
• LNB Power Supply: 13V, 18V,
• Interface mode: USB
• Adapter power supply: AC100V~240V
• C input: DC12~23V
• Output port voltage: DC12-23V
• Battery working time: about 2.5 hours continuously after full charge, varying from LNB with different power consumption.
• Charging time: 4 to 6 hours.
• Working Temperature: 0°C~40°C
• Storage Temperature: -10°C~50°C
• Exterior size: 142x82x35(mm)
• Weight: 0.42Kg
• Gross weight: 0.9 Kg
• 1 piece per gift box